Home
  Epson Equipment
  Cap Removers
  Filter Removers
  Cartridge Sprayers
  Cartridge Foam Sprayers
  Universal Sprayers
  Sinks / Dryer Sinks
  Drying Units
  Filter Welders
  R&R Replacement Filter
  Standard Filters
  Foam Pressers
  Application Tool
  New Cartridge Clips
  Cartridge Caps
  HP33 Eraser
  Price List
  Contact Us

 

Watch our
Equipment
Demonstration:
Cartridge Saw
Filter Remover
Filter Welder
requires

 


ALL CARTRIDGE SPRAYERS  |   STANDARD SPRAYERS  |  MINI SPRAYERS
_
New Improved Standard Sprayer
LEX-10N0016, 10N0217
DELL-TO529



The new sprayers, made for the black cartridges, such as the  #16, #70, and the #82,  force water through the print head, allowing you to spot cartridges that are not functioning to their full potential.  Using 1/5th  the water the old sprayers will allow you to determine if some of the cartridges should get further attention in your cleaning process.  Color cartridge sprayers will have a two stage cleaning process.  First stage will dilute and remove the existing ink while the second stage will force water through the filters and nozzle, also giving you that needed look at the nozzles output.  These color sprayers will also use considerably less water

than the older models.

Holds 56 Cartridges
W/O Frame 11.5 Lbs
With Frame 12 Lbs
Recommended Water Pressure, 30 To 45 Lbs
Height, with frame, 6 3/8 in.,
Without Frame, 4 1/8 in.
Width, 11 in.
Length, 17 in

__________________________________________________________________________

Standard Sprayer
LEX-10N0016, 10N0217
DELL-TO529



This unit will spray a concentrated pattern of water directly into the reservoir of 56 cartridges at a time. The spraying time is approximately 15 to 20 minutes. Removing the filter screen promotes the proper cleaning of these cartridges by allowing access to dried or hardened ink. The optional upper frame for this sprayer allows you to spray the nozzle of the cartridge from the outside. This sprayer has also been tested to use low temperature steam (under 275 degrees) as well as water.

Holds 56 Cartridges
W/O Frame 11.5 Lbs
With Frame 12 Lbs
Recommended Water Pressure, 30 To 45 Lbs
Height, with frame, 6 3/8 in.,
Without Frame, 4 1/8 in.
Width, 11 ¾ in.
Length, 17 ¾ in

___________________________________________________________________________
Standard Sprayer
LEX-12A1970, 17G0050, 13400HC



This is another Standard size Sprayer for the Lexmark Black Ink Cartridge. This sprayer also has the upper Frame feature available. Our sprayers will clean your cartridges quickly and effectively, freeing your time to pursue other operations. This sprayer has also been tested to use low temperature steam, (under 275 degrees).

Holds 48 Cartridges
W/O Frame, 11 ½ Lbs
With Frame, 12 Lbs
Recommended Water Pressure, 30 to 45 Lbs
Height With Frame, 8 in. W/O Frame, 4 7/8 in.
Width, 11 ¾ in.
Length, 17 ¾ in.

 

 

Copyright 2006 R&R Services. All rights reserved.